Courses
You must Sign In to take these courses.
Surgical simulation exercises allow you to familiarize yourself with set components, observe a procedure demonstration, and actively step through a procedure. A test is included at the end of each course to enhance your learning.
Fundamentals Courses
These courses allow you to review the AO principles and the
basics of bone anatomy, become familiar with the instrumentation used
for orthopaedic plating and intramedullary nailing and observe animated
technique steps.
- Fundamentals of Orthopaedic Plates and Screws Part I
- Fundamentals of Orthopaedic Plates and Screws Part II
- Fundamentals of Intramedullary Nailing
Surgical Technique Courses
These courses are designed to review the set components, demonstrate
surgical procedures and allow you to perform a simulated procedure.
- 3.5 mm LCP Proximal Humerus Plate
- 4.5 mm LCP Condylar Plate
- 4.5 mm LCP Proximal Tibia Plate
- Small Fragment LCP System (Radial Shaft Plating)
- Titanium Trochanteric Fixation Nail (TFN)
- Titanium Cannulated Tibial Nail Expert System
- Titanium Cannulated Lateral Entry Femoral Recon Nail Expert System
- Titanium Sternal Fixation System
Printing Your Certificate
After you complete the course and pass the mastery test with an 80% score or higher, the status of the course will change to "Complete." Click on "Certificate," which will appear to the right of the course name that you have completed. Then use your internet browser to print the certificate.
.